|
|
| 主要論文(部分)： ?Zhao-Hui Zhang, LongQi, Xiang-BoShen, Fu-ChiWang, Shu-KuiLee, Microstructure and mechanical properties of bulk carbon nanotubes compacted by spark plasma sintering,Materials Science&EngineeringA 573(2013)12–17.(SCI) ?Guo Wenqi, LiuJinxu, LiShukui, WangYingchun, JiWei, Microstructural evolution and deformation mechanism of the 80 W-20Cu alloy at ultra-high strain rates under explosive loading, Materials Science & Engineering A 572 (2013) 36–44.(SCI) ?Qiurong Yang, Jinxu Liu, Shukui Li, Fuchi Wang, Tengteng Wu, Fabrication and mechanical properties of Cu-coatedwoven carbon fibers reinforced aluminum alloy composite,Materials and Design 57 (2014) 442–448.(SCI) ?Xiaoliang Fang, JinxuLiu, XingWang, ShukuiLi, LinglingZheng, Study on improving“self-sharpening” capacity ofW–Cu–Zn alloy bythepressurelessinfiltrationmethod, Materials Science & Engineering A 607(2014)454–459.(SCI) ?GuoWenqi, LiuJinxu, LiShukui, ZhangHongyan, ZhaoZiying, ChengXingwang, The effect of preparation methods on the microstructure and dynamic compressive properties of 65W–25Cu –10Ni alloys, Int. Journal of Refractory Metals and Hard Materials 48 (2015) 238–244.(SCI) ?Lingli Gao, JinxuLiu, XingwangCheng, ShukuiLi, YumengLuo, QiwenGuo, Effects of short timeelectric pulse heat treatment on microstructures and mechanical properties of hot-rolled Ti–6Al–4V alloy, Materials Science & Engineering A 618(2014)104–111.(SCI) ?Liu Wang, Ying Chun Wang, Alexander P. Zhilyaev, Alexander V. Korznikov,Shu Kui Li, Elena Korznikov and Terence G. Langdonc,d. Microstructure and texture evolution in ultrafine-grained pure Ti processed by equal-channel angular pressing with subsequent dynamic compression, Scripta Materialia 77 (2014) 33–36.(SCI) ?Liu Wang, Yingchun Wang,Alexander P. Zhilyaev,Alexander V. Korznikov,Shukui Li,Elena Korznikova ,Terence G. Langdon, Dynamic compressive behavior of ultrafine-grained pure Ti at elevated temperatures after processing by ECAP, J Mater Sci (2014) 49:6640–6647.(SCI) ?A. R. NIAZI, Shu-kui LI, Ying-chun WANG, Jin-xu LIU, Zhi-yu HU, Zahid USMAN, Parameters optimization of electroless deposition of Cu on Cr-coated diamond, Trans. Nonferrous Met. Soc. China 24(2014) 136-145.(SCI) ?Hao Yanjun, Liu Jinxu, Li Jianchong, Li Shukui, Zou Qinghe, Chen Xingwang, Rapid preparation of TiC reinforced Ti6Al4V based composites by carburizing method through spark plasma sintering technique, Materials and Design 65 (2015) 94–97.(SCI) ?GuoWenqi, LiuJinxu, LiShukui, ZhangHongyan, ZhaoZiying, ChengXingwang, The effect of preparation methods on the microstructure and dynamic compressive properties of 65W–25Cu –10Ni alloys, Int. Journal of Refractory Metals and Hard Materials 48 (2015) 238–244.(SCI) ?Lingling Zheng, Jinxu Liu, Shukui Li, GuohuiWang,Wenqi Guo, Investigation on preparation and mechanical properties of W–Cu–Zn alloy with low W–W contiguity and high ductility, Materials and Design 86 (2015) 297–304.(SCI) ?Hao Yanjun, Liu Jinxu, Li Jianchong, Li Shukui, Zou Qinghe, Chen Xingwang, Rapid preparationof TiC reinforced Ti6Al4V based composites by carburizing method through spark plasma sintering technique, Materials and Design 65 (2015) 94–97 .(SCI) ?Hong Yan Zhang,Chuan Ting Wang,Ying Chun Wang,Shu Kui Li, Hong Zou,Terence G. Langdon, Microstructural evolution and microhardness variations in a Cu–36Zn–2Pb alloy processed by high-pressure torsion, J Mater Sci (2015) 50:1535–1543 .(SCI) ?Xiaoliang Fang, Jinxu Liu, XingWang, Shukui Li,Wenqi Guo, Investigation on the penetration performance and “self-sharpening”behavior of the 80W–14Cu–6Zn penetrators, Int. Journal of Refractory Metals and Hard Materials 54 (2016) 237–243 .(SCI) ?Zhiyu Hu, Jinxu Liu , Shukui Li, Yingchun Wang, Wenqi Guo, Siming Ma, preparation and anisotropic compressive deformation behaviors of tungsten fiber reinforced Cu-Zn matrix composite, Materials Science & Engineering A 708 (2017) 43–49 .(SCI) ?Hao Yanjun, Liu Jinxu, Li Jianchong, Li Shukui, Wang Guohui, Investigation on dynamic properties and failure mechanisms of Tie47Ale2Cre2Nb alloy under uniaxial dynamic compression at a temperature range of 288 Ke773 K, Journal of Alloys and Compounds 649 (2015) 122-127 .(SCI) ?GuoWenqi, Liu Jinxu, Xiao Yao, Li Shukui, Zhao Ziying, Cao Jin, Comparison of penetration performance and penetration mechanism of w-cu shaped charge liner against three kinds of target: Pure copper, carbon steel and Ti-6Al-4V alloy, Int. Journal of Refractory Metals and Hard Materials 60 (2016) 147–153 .(SCI) ?Ziying Zhao, Jinxu Liu,Wenqi Guo, Shukui Li, GuohuiWang, Effect of Zn and Ni added inW–Cu alloy on penetration performance and penetration mechanism of shaped charge liner, Int. Journal of Refractory Metals and Hard Materials 54 (2016) 90–97 .(SCI) ?Ling-Ling Zheng, Jin-Xu Liu , Shu-Kui Li,Shuang Liu, Qing-He Zou, Xing-Wang Cheng,Preparation and properties of W–Cu–Zn alloy with low W–W contiguity, Rare Met. (2016) 35(3):242–248 .(SCI) ?Jin Cao, Jinxu Liu, Xingwei Liu, Shukui Li, Xinying Xue, Effect of the distribution state of transition phase on the mechanical properties and failure mechanisms of the W-Mo-Cu alloy by tuning elements content, Journal of Alloys and Compounds, 2020，154333、1-9 .(SCI) ?Jia Lan, Jinxu Liu, Song Zhang, Xinying Xue, Chuan He, Zhouyang Wu, Min Yang, Shukui Li, Influence of multi-oxidants on reaction characteristics of PTFE-Al-XmOY reactive material, Materials and Design, 2020,186,108325 .(SCI) ?Xuzhen Liu, Yanjun Hao, Jinxu Liu, Shukui Li, Qi Cai, Yanwei Lv, Comparison of high-temperature deformation behaviors for Ti–Al–Nb–Valloy with different initial microstructures at the strain of 0.7, Materials Science & Engineering A, 2020，795，1-10 .(SCI) ?Min Yang, Jinxu Liu, Shukui Li, Song Zhang, Zhihua Zhuang, Yingchun Wang, Chuan He,Self-sustained solid-state exothermic reaction for scalable graphene production, Materials and Design, 2020，196,1-6 .(SCI) ?Li Huicong，Cai Qi，Li Shukui，Xu Hanqing，Effects of Mo equivalent on the phase constituent, microstructure and compressive mechanical properties of Ti-Nb-Mo-Ta alloys prepared by powder metallurgy，JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T，Vol.16,P588-598.(SCI) ?Fang, Zhuqing,Li, Shukui, Liu, Jiping, Probing the Effects of Deuteration on the Structure and Thermal Behavior of TNT-d(5),PROPELLANTS EXPLOSIVES PYROTECHNICS, VOL46,P1581-1588.(SCI) ?Wang, Yingchun,Liu, Jinxu,Yang, Min,Hou, Lijuan,Xu, Tingting,Li, Shukui,,Zhuang, Zhihua,He, Chuan, Energetic-Materials-Driven Synthesis of Graphene-Encapsulated Tin Oxide Nanoparticles for Sodium-Ion Batteries,MATERIALS,VOL.14.(SCI) ?Liang Jia-xin,Wang Ying-chun,Cheng Xing-wang,Li Zhuang Du, Jin-ke,Li Shu-kui, Microstructure and mechanical properties of a Cr-Ni-W-Mo steel processed by thermo-mechanical controlled processing, JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, VOL.28,P713-721.(SCI) ?Cai Qi,Li Xinyao,Li Shukui,He Chuan,Liu Xingwei,Feng Xinya,Dehydrogenation-induced crystal defects for significant enhancement of critical current density in polycrystalline H-doped MgB2, JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS,VOL.32,P843-852.(SCI) ?Li, HC,Cai, Q, Li, SK,Xu, HQ ,Effects of Mo equivalent on the phase constituent, microstructure and compressive mechanical properties of Ti-Nb-Mo-Ta alloys prepared by powder metallurgy, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,VOL6,P588-598.(SCI) ? Fang, ZQ , Li, SK,Liu, JP ,Probing the Effects of Deuteration on the Structure and Thermal Behavior of TNT-d(5), PROPELLANTS EXPLOSIVES PYROTECHNICS,VOL46,P1581-1588.(SCI) ? Li, Z,Wang, YC,Cheng, XW, Li, ZY ,Gao, C, Li, SK, The effect of rolling and subsequent aging on microstructures and tensile properties of a Fe-Mn-Al-C austenitic steel, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,VOL822.(SCI) ? Wang, YC,Liu, JX,Yang, M,Hou, LJ, Xu, TT, Li, SK , Zhuang, ZH ,He, C, Energetic-Materials-Driven Synthesis of Graphene-Encapsulated Tin Oxide Nanoparticles for Sodium-Ion Batteries ,MATERIALS,VOL14.(SCI) ? Liang, JX ,Wang, YC ,Cheng, XW ,Li, Z, Du, JK,Li, SK ,Microstructure and mechanical properties of a Cr-Ni-W-Mo steel processed by thermo-mechanical controlled processing ,JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL VOL28,P713-721.(SCI) ? Gao, C ,Wang, YC ,Cheng, XW, Ma, XY,Li, SK, Cai, HN,Tensile properties of tungsten/glass composites at elevated temperatures,MATERIALS CHEMISTRY AND PHYSICS,VOL259.(SCI) ? Cai, Q ,Li, XY , Li, SK,He, C,Liu, XW,Feng, XY ,Dehydrogenation-induced crystal defects for significant enhancement of critical current density in polycrystalline H-doped MgB2,JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS,VOL32,P843-852.(SCI) ? Yang, M,Liu, JX , Li, SK,Zhang, S ,Zhuang, ZH, Wang, YC ,He, C,Self-sustained solid -state exothermic reaction for scalable graphene production,MATERIALS & DESIGN,VOL196.(SCI) ? Liu, XZ,Hao, YJ,Liu, JX , Li, SK, Cai, Q, Lv, YW , Comparison of high-temperature deformation behaviors for Ti-Al-Nb-V alloy with different initial microstructures at the strain of 0.7,MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,VOL795.(SCI) ? Fu, HD,Feng, XY, Liu, JX, Yang, ZM, He, C ,Li, SK,An investigation on anti -impact and penetration performance of basalt fiber composites with different weave and lay-up modes, DEFENCE TECHNOLOGY ,VOL16,P787-801.(SCI) ? Cao, J ,Liu, JX , Liu, XW,Li, SK,Xue, XY,Effect of the distribution state of transition phase on the mechanical properties and failure mechanisms of the W-Mo-Cu alloy by tuning elements content ,JOURNAL OF ALLOYS AND COMPOUNDS,VOL827.(SCI) ? Li, Z ,Wang, YC ,Cheng, XW,Li, ZY , Du, JK, Li, SK ,The effect of Ti-Mo-Nb on the microstructures and tensile properties of a Fe-Mn-Al-C austenitic steel,MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,VOL780.(SCI) ? Li, Z,Wang, YC , Cheng, XW ,Liang, JX , Li, SK,Compressive behavior of a Fe-Mn-Al-C lightweight steel at different strain rates,MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,VOL772.(SCI) ? Lan, J , Liu, JX ,Zhang, S ,Xue, XY,He, C ,Wu, ZY,Yang, M, Li, SK, Influence of multi-oxidants on reaction characteristics of PTFE-Al-XmOY reactive material,MATERIALS & DESIGN,VOL186.(SCI)
發明專利(部分)： ?李樹奎，王富恥，王迎春，黃國華. 一種高 XXX 的 WiNi-Fe 系 XXX 材料. 專利號: ZL200510001484.2 授權公告日: 2007.11.28 ?李樹奎，王富恥，張朝暉. 一種易碎型 XXX 材料動態拉伸強度測試裝置. 專利號: ZL200510001460.7 授權公告日: 2007.8.22 ?王富恥，李樹奎，王迎春，程興旺，黃國華，趙紅梅. 高侵徹XX的中小XX的W-Ni-CuXX 材料. 專利號: ZL 200510001485.7 授權公告日: 2007.8.22 ?程興旺，王富恥，黃國華，李樹奎，王迎春. 一種高侵徹XX的純鎢XX材料的制備方法. 專利號: ZL 200710082047.7 授權公告日: 2009.7.1 ?程興旺，王富恥，李樹奎，王迎春. 一種具有 XX 效應的 W-Ni-Al 材料. 專利號: ZL200710082048.1 授權公告日: 2009.7.1 ?王富恥，張朝暉，李樹奎. 一種鎢絲集束 XXX 及其靜液擠壓成形方法. 專利號: ZL200510001459.4 授權公告日: 2009.10.21 ?張朝暉，王富恥，李樹奎，王魯. 一種鎢錸 XXX 材料及制備 XX 的方法. 專利號: ZL200510001221.1 授權公告日: 2009.12.16 ?張朝暉，王富恥，李樹奎. 一種稀土元素鑭改性的XX鎢合金材料的制備方法. 專利號: ZL200510001458.X 授權公告日: 2010.4.14 ?劉金旭，李樹奎，郝彥君, “一種 XXXTi3AlNb XXX 制備技術”. 專利號: ZL201418007451.9 , 授權公告日: 2017.4.15 ?劉金旭，李樹奎，郝彥君, “一種 XXXTiAlNb XXX 制備技術”. 專利號: ZL201418007450.4 , 授權公告日: 2017.4.15 ?劉金旭，李樹奎，曹進, “一種W-Cu合金 XXX制備技術”. 專利號: ZL 201318007353.0 , 授權公告日: 2016.7.14
|
